The Blumat Drip (Tropf) System does not have to be plugged in to a power supply, nor does it require a timer or computer. Each ceramic cone responds to the moisture content of the surrounding soil, only releasing the amount of water required by the particular plant at any given moment
The Blumat Drip system is a sensor and drip feed system, both at the same time.
The slow and measured release of water enables plants to receive water which has been allowed to stand for a while at a temperature which is in keeping with the environment. This ensures both profuse flowering as well as healthy plant growth.
The 12-cone set contains:
12 cones, each with a 8-3-8 connector to the feeding tube and a short length of 3mm tubing (the drip comes from the end of this tubing).
7m of 8mm diameter feeding tube - you cut this where you want to have a cone.
Various connectors which mean the set-up can have branches: 8-8mm elbow, 8-8-8 t-piece, 8-8 connector (which could be used to join a set), 8-3mm connector, spare 8-3-8 connector.
Tank connector to link the system to a water reservoir. (A pressure reducer is required to link the system to a mains water tap.)
SPECIAL OFFER - 2 ADDITIONAL CONES in every box valued at $24.95 so 14 cones in total per box (Note that 3 boxes ie 42 cones in total works out more economical than a 40-cone set).
Conventional watering systems release water at intervals which are automatically scheduled via computer. What they do not take into consideration, is the amount of sunshine, the current moisture of the soil or the varying water requirements of individual plants.
YOU CAN NOW SAVE TIME, MONEY AND RESOURCES!